Xpoint has no radio frequencies in the FAA data. Pilots at airports without a published frequency usually use the CTAF, 122.9 MHz at most uncontrolled airfields.
About Xpoint
- No control tower: traffic is uncontrolled and pilots self-announce.
- 1 runway, the longest 3,468 ft (12/30).
- Field elevation 3,901 ft above sea level.
- Responsible air route traffic control center: ZDV.
Xpoint runways
| Runway | Length | Width | Surface | Lighting | Instrument approach and pattern |
|---|---|---|---|---|---|
| 12/30 | 3,468 ft | 100 ft | Turf |
Location and details
- Identifier
- 6SD4
- Type
- Airport, private use
- Location
- Edgemont, Fall River County, South Dakota
- Coordinates
- 43.1672, -103.9098
- Elevation
- 3,901 ft
- Control tower
- No
- Controlling facilities
- Denver Center
Frequently asked questions
How many runways does Xpoint have?
Xpoint has 1 runway: 12/30 (3,468 by 100 ft).
What is the elevation of Xpoint?
Xpoint is 3,901 feet above sea level.
Can I listen to Xpoint on a scanner?
Yes. Air traffic control and airport communications use the VHF aircraft band, 118 to 137 MHz, in AM mode. Most scanners and handheld airband radios can receive it; set the mode to AM and enter the frequency.
Airports near Xpoint
- Edgemont Municipal (6V0), Edgemont, 8 nautical miles away
- Black Hills Flyway (SD27), Hot Springs, 20 nautical miles away
- Rocking T (95WY), Lusk, 22 nautical miles away
- Flying T (SD68), Hot Springs, 25 nautical miles away
- Hot Springs Municipal (HSR / KHSR), Hot Springs, 26 nautical miles away
- Miller Strip (82WY), Lusk, 32 nautical miles away
- Lusk Municipal (LSK / KLSK), Lusk, 33 nautical miles away
- Custer County (CUT / KCUT), Custer, 36 nautical miles away