Skip to content

Miller Strip (82WY) Frequencies

Miller Strip (82WY) is a private-use airport 15 nautical miles northwest of Lusk, Wyoming. It has no control tower; pilots announce on the CTAF, 122.90 MHz.

Quick answer: Miller Strip frequencies

  • CTAF 122.90 MHz

FAA data cycle effective October 29, 2026. Verify against a current chart before flying.

About Miller Strip

  • 1 radio frequency is listed for Miller Strip by the FAA.
  • No control tower: traffic is uncontrolled and pilots self-announce.
  • 1 runway, the longest 1,695 ft (12/30).
  • Field elevation 4,901 ft above sea level.
  • Responsible air route traffic control center: ZDV.

Miller Strip radio frequencies

Air traffic control and airport communications use the VHF aircraft band (118 to 137 MHz) in AM mode.

CTAF

CTAF
Frequency (MHz)Service
122.90 CTAF

Miller Strip runways

Runways at Miller Strip
RunwayLengthWidthSurfaceLightingInstrument approach and pattern
12/30 1,695 ft 20 ft Grass

Location and details

Identifier
82WY
Type
Airport, private use
Location
Lusk, Niobrara County, Wyoming
Coordinates
42.9609, -104.5863
Elevation
4,901 ft
Control tower
No
Controlling facilities
Denver Center

Frequently asked questions

What is the CTAF frequency for Miller Strip?

The common traffic advisory frequency (CTAF) for Miller Strip is 122.90 MHz. Confirm on a current chart before flying; frequencies can change.

How many runways does Miller Strip have?

Miller Strip has 1 runway: 12/30 (1,695 by 20 ft).

What is the elevation of Miller Strip?

Miller Strip is 4,901 feet above sea level.

Can I listen to Miller Strip on a scanner?

Yes. Air traffic control and airport communications use the VHF aircraft band, 118 to 137 MHz, in AM mode. Most scanners and handheld airband radios can receive it; set the mode to AM and enter the frequency.

Airports near Miller Strip