Skip to content

Blackbriar Airport (48NR) Frequencies

Blackbriar Airport (48NR) is a private-use airport 3 nautical miles southeast of Pelham, North Carolina. It has no control tower; pilots announce on the CTAF, 122.90 MHz.

Quick answer: Blackbriar frequencies

  • CTAF 122.90 MHz

FAA data cycle effective October 29, 2026. Verify against a current chart before flying.

About Blackbriar

  • 1 radio frequency is listed for Blackbriar by the FAA.
  • No control tower: traffic is uncontrolled and pilots self-announce.
  • 1 runway, the longest 2,122 ft (07/25).
  • Field elevation 599 ft above sea level.
  • Responsible air route traffic control center: ZDC.

Blackbriar radio frequencies

Air traffic control and airport communications use the VHF aircraft band (118 to 137 MHz) in AM mode.

CTAF

CTAF
Frequency (MHz)Service
122.90 CTAF

Blackbriar runways

Runways at Blackbriar
RunwayLengthWidthSurfaceLightingInstrument approach and pattern
07/25 2,122 ft 80 ft Turf (fair)

Location and details

Identifier
48NR
Type
Airport, private use
Location
Pelham, Caswell County, North Carolina
Coordinates
36.4679, -79.4335
Elevation
599 ft
Control tower
No
Controlling facilities
Washington Center

Frequently asked questions

What is the CTAF frequency for Blackbriar?

The common traffic advisory frequency (CTAF) for Blackbriar is 122.90 MHz. Confirm on a current chart before flying; frequencies can change.

How many runways does Blackbriar have?

Blackbriar has 1 runway: 07/25 (2,122 by 80 ft).

What is the elevation of Blackbriar?

Blackbriar is 599 feet above sea level.

Can I listen to Blackbriar on a scanner?

Yes. Air traffic control and airport communications use the VHF aircraft band, 118 to 137 MHz, in AM mode. Most scanners and handheld airband radios can receive it; set the mode to AM and enter the frequency.

Airports near Blackbriar