Skip to content

Saw Home Heliport (NR27) Frequencies

Saw Home Heliport (NR27) is a private-use heliport 4 nautical miles northwest of Rocky Mount, North Carolina. It has no control tower; pilots announce on the CTAF, 122.90 MHz.

Quick answer: Saw Home frequencies

  • CTAF 122.90 MHz

FAA data cycle effective October 29, 2026. Verify against a current chart before flying.

About Saw Home

  • 1 radio frequency is listed for Saw Home by the FAA.
  • No control tower: traffic is uncontrolled and pilots self-announce.
  • 1 runway, the longest 100 ft (H1).
  • Field elevation 158 ft above sea level.
  • Responsible air route traffic control center: ZDC.

Saw Home radio frequencies

Air traffic control and airport communications use the VHF aircraft band (118 to 137 MHz) in AM mode.

CTAF

CTAF
Frequency (MHz)Service
122.90 CTAF

Saw Home runways

Runways at Saw Home
RunwayLengthWidthSurfaceLightingInstrument approach and pattern
H1 100 ft 100 ft Concrete and turf (fair)

FAA remarks

  • Fato len x wid 200 feet x 200 feet. Prim ingress 220 deg.

Location and details

Identifier
NR27
Type
Heliport, private use
Location
Rocky Mount, Nash County, North Carolina
Coordinates
35.9708, -77.8503
Elevation
158 ft
Control tower
No
Controlling facilities
Washington Center

Frequently asked questions

What is the CTAF frequency for Saw Home?

The common traffic advisory frequency (CTAF) for Saw Home is 122.90 MHz. Confirm on a current chart before flying; frequencies can change.

How many runways does Saw Home have?

Saw Home has 1 runway: H1 (100 by 100 ft).

What is the elevation of Saw Home?

Saw Home is 158 feet above sea level.

Can I listen to Saw Home on a scanner?

Yes. Air traffic control and airport communications use the VHF aircraft band, 118 to 137 MHz, in AM mode. Most scanners and handheld airband radios can receive it; set the mode to AM and enter the frequency.

Airports near Saw Home