Skip to content

Ross Landing Zone 2 (1OI7) Frequencies

Ross Landing Zone 2 (1OI7) is a private-use heliport 5 nautical miles wsw of Hamilton, Ohio. It has no control tower; pilots announce on the CTAF, 122.90 MHz.

Quick answer: Ross Landing Zone 2 frequencies

  • CTAF 122.90 MHz

FAA data cycle effective October 29, 2026. Verify against a current chart before flying.

About Ross Landing Zone 2

  • 1 radio frequency is listed for Ross Landing Zone 2 by the FAA.
  • No control tower: traffic is uncontrolled and pilots self-announce.
  • 1 runway, the longest 40 ft (H1).
  • Field elevation 614 ft above sea level.
  • Responsible air route traffic control center: ZID.

Ross Landing Zone 2 radio frequencies

Air traffic control and airport communications use the VHF aircraft band (118 to 137 MHz) in AM mode.

CTAF

CTAF
Frequency (MHz)Service
122.90 CTAF

Ross Landing Zone 2 runways

Runways at Ross Landing Zone 2
RunwayLengthWidthSurfaceLightingInstrument approach and pattern
H1 40 ft 40 ft Concrete

FAA remarks

  • For cd contact cincinnati approach at 859-372-6440.
  • All HEL ingress/egress ops should be conducted on a 085-235 deg crs clkws using the cntr of the heliport as the ref point.

Location and details

Identifier
1OI7
Type
Heliport, private use
Location
Hamilton, Butler County, Ohio
Coordinates
39.3834, -84.6543
Elevation
614 ft
Control tower
No
Controlling facilities
Indianapolis Center

Frequently asked questions

What is the CTAF frequency for Ross Landing Zone 2?

The common traffic advisory frequency (CTAF) for Ross Landing Zone 2 is 122.90 MHz. Confirm on a current chart before flying; frequencies can change.

How many runways does Ross Landing Zone 2 have?

Ross Landing Zone 2 has 1 runway: H1 (40 by 40 ft).

What is the elevation of Ross Landing Zone 2?

Ross Landing Zone 2 is 614 feet above sea level.

Can I listen to Ross Landing Zone 2 on a scanner?

Yes. Air traffic control and airport communications use the VHF aircraft band, 118 to 137 MHz, in AM mode. Most scanners and handheld airband radios can receive it; set the mode to AM and enter the frequency.

Airports near Ross Landing Zone 2