Skip to content

Red River Airport (OK2) Frequencies

Red River Airport (OK2) is a public-use airport 8 nautical miles southwest of Kingston, Oklahoma. It has no control tower; pilots announce on the CTAF, 122.90 MHz.

Quick answer: Red River frequencies

  • CTAF 122.90 MHz

FAA data cycle effective October 29, 2026. Verify against a current chart before flying.

About Red River

  • 1 radio frequency is listed for Red River by the FAA.
  • No control tower: traffic is uncontrolled and pilots self-announce.
  • 1 runway, the longest 1,883 ft (18/36).
  • Field elevation 792 ft above sea level.
  • Responsible air route traffic control center: ZFW.

Red River radio frequencies

Air traffic control and airport communications use the VHF aircraft band (118 to 137 MHz) in AM mode.

CTAF

CTAF
Frequency (MHz)Service
122.90 CTAF

Red River runways

Runways at Red River
RunwayLengthWidthSurfaceLightingInstrument approach and pattern
18/36 1,883 ft 100 ft Turf (fair)

FAA remarks

  • Public airport - VFR only.

Location and details

Identifier
OK2
Type
Airport, open to the public
Location
Kingston, Marshall County, Oklahoma
Coordinates
33.9140, -96.8447
Elevation
792 ft
Control tower
No
Controlling facilities
Fort Worth Center

Frequently asked questions

What is the CTAF frequency for Red River?

The common traffic advisory frequency (CTAF) for Red River is 122.90 MHz. Confirm on a current chart before flying; frequencies can change.

How many runways does Red River have?

Red River has 1 runway: 18/36 (1,883 by 100 ft).

What is the elevation of Red River?

Red River is 792 feet above sea level.

Can I listen to Red River on a scanner?

Yes. Air traffic control and airport communications use the VHF aircraft band, 118 to 137 MHz, in AM mode. Most scanners and handheld airband radios can receive it; set the mode to AM and enter the frequency.

Airports near Red River