Mill Springs has no radio frequencies in the FAA data. Pilots at airports without a published frequency usually use the CTAF, 122.9 MHz at most uncontrolled airfields.
About Mill Springs
- No control tower: traffic is uncontrolled and pilots self-announce.
- 1 runway, the longest 40 ft (H1).
- Field elevation 1,001 ft above sea level.
- Responsible air route traffic control center: ZID.
Mill Springs runways
| Runway | Length | Width | Surface | Lighting | Instrument approach and pattern |
|---|---|---|---|---|---|
| H1 | 40 ft | 20 ft | Concrete |
Location and details
- Identifier
- 4KY0
- Type
- Heliport, private use
- Location
- Monticello, Wayne County, Kentucky
- Coordinates
- 36.9297, -84.7641
- Elevation
- 1,001 ft
- Control tower
- No
- Controlling facilities
- Indianapolis Center
Frequently asked questions
How many runways does Mill Springs have?
Mill Springs has 1 runway: H1 (40 by 20 ft).
What is the elevation of Mill Springs?
Mill Springs is 1,001 feet above sea level.
Can I listen to Mill Springs on a scanner?
Yes. Air traffic control and airport communications use the VHF aircraft band, 118 to 137 MHz, in AM mode. Most scanners and handheld airband radios can receive it; set the mode to AM and enter the frequency.
Airports near Mill Springs
- Wayne County (EKQ / KEKQ), Monticello, 6 nautical miles away
- Lake Cumberland Regional (SME / KSME), Somerset, 10 nautical miles away
- Russell County (K24), Jamestown, 17 nautical miles away
- MC Creary County (18I), Pine Knot, 23 nautical miles away
- Medical Center Albany (45KY), Albany, 23 nautical miles away
- Westlake Regional Hospital (48KY), Columbia, 27 nautical miles away
- Williamsburg-Whitley County (BYL / KBYL), Williamsburg, 28 nautical miles away
- Columbia-Adair County (I96), Columbia, 30 nautical miles away