Diamond C has no radio frequencies in the FAA data. Pilots at airports without a published frequency usually use the CTAF, 122.9 MHz at most uncontrolled airfields.
About Diamond C
- No control tower: traffic is uncontrolled and pilots self-announce.
- 1 runway, the longest 1,910 ft (18/36).
- Field elevation 1,270 ft above sea level.
- Responsible air route traffic control center: ZME.
Diamond C runways
| Runway | Length | Width | Surface | Lighting | Instrument approach and pattern |
|---|---|---|---|---|---|
| 18/36 | 1,910 ft | 30 ft | Turf |
Location and details
- Identifier
- 71AR
- Type
- Airport, private use
- Location
- Gentry, Benton County, Arkansas
- Coordinates
- 36.2826, -94.4738
- Elevation
- 1,270 ft
- Control tower
- No
- Controlling facilities
- Memphis Center
Frequently asked questions
How many runways does Diamond C have?
Diamond C has 1 runway: 18/36 (1,910 by 30 ft).
What is the elevation of Diamond C?
Diamond C is 1,270 feet above sea level.
Can I listen to Diamond C on a scanner?
Yes. Air traffic control and airport communications use the VHF aircraft band, 118 to 137 MHz, in AM mode. Most scanners and handheld airband radios can receive it; set the mode to AM and enter the frequency.
Airports near Diamond C
- Crystal Lake (5M5), Decatur, 4 nautical miles away
- Smith Field (SLG / KSLG), Siloam Springs, 6 nautical miles away
- Northwest Arkansas Ntl (XNA / KXNA), Fayetteville/Springdale/Rogers, 8 nautical miles away
- Gravette Field (AR09), Gravette, 8 nautical miles away
- Bentonville Municipal/Louise M Thaden Field (VBT / KVBT), Bentonville, 13 nautical miles away
- Wedington Woods (67AR), Fayetteville, 14 nautical miles away
- Springdale Municipal (ASG / KASG), Springdale, 18 nautical miles away
- Washington Regional Landing (4AR8), Fayetteville, 19 nautical miles away