Skip to content

Burwash Airport (CYDB) Frequencies

Burwash Airport (CYDB) is a public-use airport 2 nautical miles northwest of Burwash. The FAA lists no radio frequencies for it.

Burwash has no radio frequencies in the FAA data. Pilots at airports without a published frequency usually use the CTAF, 122.9 MHz at most uncontrolled airfields.

Current weather at Burwash

METAR CYDB 181900Z 00000KT 15SM FEW001 FEW075 SCT250 M16/M18 A2980 RMK ST1AC1CC2 ST TR FROIN SLP157

  • VFR
  • Wind: 0° at 0 kt
  • Visibility: 15 mi
  • Temperature: -16°C (3°F)
  • Altimeter: 29.80 inHg
  • Sky: few clouds at 100 ft, few clouds at 7,500 ft, scattered at 25,000 ft

TAF TAF CYDB 181743Z 1818/1906 VRB03KT 1/4SM FZFG BKN001 TEMPO 1818/1821 P6SM NSW SCT002 FM182100 12010KT P6SM SCT150 RMK NXT FCST BY 190000Z

Report from CYDB, observed 2026-11-18 19:00:00 UTC. Source: National Weather Service Aviation Weather Center. Not for flight planning.

About Burwash

  • No control tower: traffic is uncontrolled and pilots self-announce.
  • 1 runway, the longest 5,007 ft (10/28).
  • Field elevation 2,645 ft above sea level.
  • Responsible air route traffic control center: ZEG.

Burwash runways

Runways at Burwash
RunwayLengthWidthSurfaceLightingInstrument approach and pattern
10/28 5,007 ft 100 ft Gravel Low intensity 10: V2L; 28: V2L

FAA remarks

  • For attendance schedule call 867-841-4242 or 867-634-2035/2046.

Location and details

Identifier
CYDB
Type
Airport, open to the public
Location
Burwash, Yukon Terr, Canada County
Coordinates
61.3706, -139.0400
Elevation
2,645 ft
Control tower
No
Controlling facilities
Edmonton Center

Frequently asked questions

How many runways does Burwash have?

Burwash has 1 runway: 10/28 (5,007 by 100 ft).

What is the elevation of Burwash?

Burwash is 2,645 feet above sea level.

Can I listen to Burwash on a scanner?

Yes. Air traffic control and airport communications use the VHF aircraft band, 118 to 137 MHz, in AM mode. Most scanners and handheld airband radios can receive it; set the mode to AM and enter the frequency.