Skip to content

Bldg Care EMS Helistop (WT78) Frequencies

Bldg Care EMS Helistop (WT78) is a private-use heliport 1 nautical mile north of Seattle, Washington. It has no control tower; pilots announce on the CTAF, 122.90 MHz.

Quick answer: Bldg Care EMS Helistop frequencies

  • CTAF 122.90 MHz

FAA data cycle effective October 29, 2026. Verify against a current chart before flying.

About Bldg Care EMS Helistop

  • 1 radio frequency is listed for Bldg Care EMS Helistop by the FAA.
  • No control tower: traffic is uncontrolled and pilots self-announce.
  • 1 runway, the longest 40 ft (H1).
  • Field elevation 230 ft above sea level.
  • Responsible air route traffic control center: ZSE.

Bldg Care EMS Helistop radio frequencies

Air traffic control and airport communications use the VHF aircraft band (118 to 137 MHz) in AM mode.

CTAF

CTAF
Frequency (MHz)Service Notes
122.90 CTAF Conditional. The proponet should meet all state and local requirements, the landing area should be limited to private-use only and all operations should be conducted visual conditions. Recommended establishment and use of CTAF.

Bldg Care EMS Helistop runways

Runways at Bldg Care EMS Helistop
RunwayLengthWidthSurfaceLightingInstrument approach and pattern
H1 40 ft 40 ft Concrete (good) Perimeter

FAA remarks

  • For cd contact seattle approach at 206-214-4794.
  • All ops use north pad. South pad ops na.
  • Medical use only.

Location and details

Identifier
WT78
Type
Heliport, private use
Location
Seattle, King County, Washington
Coordinates
47.6626, -122.2838
Elevation
230 ft
Control tower
No
Controlling facilities
Seattle Center

Frequently asked questions

What is the CTAF frequency for Bldg Care EMS Helistop?

The common traffic advisory frequency (CTAF) for Bldg Care EMS Helistop is 122.90 MHz. Confirm on a current chart before flying; frequencies can change.

How many runways does Bldg Care EMS Helistop have?

Bldg Care EMS Helistop has 1 runway: H1 (40 by 40 ft).

What is the elevation of Bldg Care EMS Helistop?

Bldg Care EMS Helistop is 230 feet above sea level.

Can I listen to Bldg Care EMS Helistop on a scanner?

Yes. Air traffic control and airport communications use the VHF aircraft band, 118 to 137 MHz, in AM mode. Most scanners and handheld airband radios can receive it; set the mode to AM and enter the frequency.

Airports near Bldg Care EMS Helistop