Skip to content

Big Sandy Landing (82NR) Frequencies

Big Sandy Landing (82NR) is a private-use airport 8 nautical miles north of Canton, North Carolina. The FAA lists no radio frequencies for it.

Big Sandy Landing has no radio frequencies in the FAA data. Pilots at airports without a published frequency usually use the CTAF, 122.9 MHz at most uncontrolled airfields.

About Big Sandy Landing

  • No control tower: traffic is uncontrolled and pilots self-announce.
  • 1 runway, the longest 1,000 ft (09/27).
  • Field elevation 2,210 ft above sea level.
  • Responsible air route traffic control center: ZTL.

Big Sandy Landing runways

Runways at Big Sandy Landing
RunwayLengthWidthSurfaceLightingInstrument approach and pattern
09/27 1,000 ft 50 ft Turf 27: right-hand traffic

FAA remarks

  • Plines on w end of airport. Trees on e end of runway.

Location and details

Identifier
82NR
Type
Airport, private use
Location
Canton, Buncombe County, North Carolina
Coordinates
35.6738, -82.8066
Elevation
2,210 ft
Control tower
No
Controlling facilities
Atlanta Center

Frequently asked questions

How many runways does Big Sandy Landing have?

Big Sandy Landing has 1 runway: 09/27 (1,000 by 50 ft).

What is the elevation of Big Sandy Landing?

Big Sandy Landing is 2,210 feet above sea level.

Can I listen to Big Sandy Landing on a scanner?

Yes. Air traffic control and airport communications use the VHF aircraft band, 118 to 137 MHz, in AM mode. Most scanners and handheld airband radios can receive it; set the mode to AM and enter the frequency.

Airports near Big Sandy Landing