Skip to content

Bent Oak Airport (96AL) Frequencies

Bent Oak Airport (96AL) is a private-use airport 7 nautical miles wsw of Bay Minette, Alabama. It has no control tower; pilots announce on the CTAF, 122.90 MHz.

Quick answer: Bent Oak frequencies

  • CTAF 122.90 MHz

FAA data cycle effective October 29, 2026. Verify against a current chart before flying.

About Bent Oak

  • 1 radio frequency is listed for Bent Oak by the FAA.
  • No control tower: traffic is uncontrolled and pilots self-announce.
  • 1 runway, the longest 1,400 ft (18/36).
  • Field elevation 87 ft above sea level.
  • Responsible air route traffic control center: ZHU.

Bent Oak radio frequencies

Air traffic control and airport communications use the VHF aircraft band (118 to 137 MHz) in AM mode.

CTAF

CTAF
Frequency (MHz)Service
122.90 CTAF

Bent Oak runways

Runways at Bent Oak
RunwayLengthWidthSurfaceLightingInstrument approach and pattern
18/36 1,400 ft 200 ft Turf

Location and details

Identifier
96AL
Type
Airport, private use
Location
Bay Minette, Baldwin County, Alabama
Coordinates
30.8277, -87.8892
Elevation
87 ft
Control tower
No
Controlling facilities
Houston Center

Frequently asked questions

What is the CTAF frequency for Bent Oak?

The common traffic advisory frequency (CTAF) for Bent Oak is 122.90 MHz. Confirm on a current chart before flying; frequencies can change.

How many runways does Bent Oak have?

Bent Oak has 1 runway: 18/36 (1,400 by 200 ft).

What is the elevation of Bent Oak?

Bent Oak is 87 feet above sea level.

Can I listen to Bent Oak on a scanner?

Yes. Air traffic control and airport communications use the VHF aircraft band, 118 to 137 MHz, in AM mode. Most scanners and handheld airband radios can receive it; set the mode to AM and enter the frequency.

Airports near Bent Oak