Skip to content

Bell-Aire Airport (WN19) Frequencies

Bell-Aire Airport (WN19) is a private-use airport 6 nautical miles wsw of Toppenish, Washington. It has no control tower; pilots announce on the CTAF, 122.90 MHz.

Quick answer: Bell-Aire frequencies

  • CTAF 122.90 MHz

FAA data cycle effective October 29, 2026. Verify against a current chart before flying.

About Bell-Aire

  • 1 radio frequency is listed for Bell-Aire by the FAA.
  • No control tower: traffic is uncontrolled and pilots self-announce.
  • 1 runway, the longest 1,754 ft (09/27).
  • Field elevation 768 ft above sea level.
  • Responsible air route traffic control center: ZSE.

Bell-Aire radio frequencies

Air traffic control and airport communications use the VHF aircraft band (118 to 137 MHz) in AM mode.

CTAF

CTAF
Frequency (MHz)Service
122.90 CTAF

Bell-Aire runways

Runways at Bell-Aire
RunwayLengthWidthSurfaceLightingInstrument approach and pattern
09/27 1,754 ft 20 ft Turf (fair)

Location and details

Identifier
WN19
Type
Airport, private use
Location
Toppenish, Yakima County, Washington
Coordinates
46.3320, -120.4438
Elevation
768 ft
Control tower
No
Controlling facilities
Seattle Center

Frequently asked questions

What is the CTAF frequency for Bell-Aire?

The common traffic advisory frequency (CTAF) for Bell-Aire is 122.90 MHz. Confirm on a current chart before flying; frequencies can change.

How many runways does Bell-Aire have?

Bell-Aire has 1 runway: 09/27 (1,754 by 20 ft).

What is the elevation of Bell-Aire?

Bell-Aire is 768 feet above sea level.

Can I listen to Bell-Aire on a scanner?

Yes. Air traffic control and airport communications use the VHF aircraft band, 118 to 137 MHz, in AM mode. Most scanners and handheld airband radios can receive it; set the mode to AM and enter the frequency.

Airports near Bell-Aire