Skip to content

Beam Farms Airport (OI85) Frequencies

Beam Farms Airport (OI85) is a private-use airport 3 nautical miles wnw of Sabina, Ohio. It has no control tower; pilots announce on the CTAF, 122.90 MHz.

Quick answer: Beam Farms frequencies

  • CTAF 122.90 MHz

FAA data cycle effective October 29, 2026. Verify against a current chart before flying.

About Beam Farms

  • 1 radio frequency is listed for Beam Farms by the FAA.
  • No control tower: traffic is uncontrolled and pilots self-announce.
  • 1 runway, the longest 3,300 ft (05/23).
  • Field elevation 1,095 ft above sea level.
  • Responsible air route traffic control center: ZID.

Beam Farms radio frequencies

Air traffic control and airport communications use the VHF aircraft band (118 to 137 MHz) in AM mode.

CTAF

CTAF
Frequency (MHz)Service
122.90 CTAF

Beam Farms runways

Runways at Beam Farms
RunwayLengthWidthSurfaceLightingInstrument approach and pattern
05/23 3,300 ft 30 ft Asphalt 23: right-hand traffic

FAA remarks

  • For cd contact columbus approach at 614-338-8537.

Location and details

Identifier
OI85
Type
Airport, private use
Location
Sabina, Clinton County, Ohio
Coordinates
39.5019, -83.7119
Elevation
1,095 ft
Control tower
No
Controlling facilities
Indianapolis Center

Frequently asked questions

What is the CTAF frequency for Beam Farms?

The common traffic advisory frequency (CTAF) for Beam Farms is 122.90 MHz. Confirm on a current chart before flying; frequencies can change.

How many runways does Beam Farms have?

Beam Farms has 1 runway: 05/23 (3,300 by 30 ft).

What is the elevation of Beam Farms?

Beam Farms is 1,095 feet above sea level.

Can I listen to Beam Farms on a scanner?

Yes. Air traffic control and airport communications use the VHF aircraft band, 118 to 137 MHz, in AM mode. Most scanners and handheld airband radios can receive it; set the mode to AM and enter the frequency.

Airports near Beam Farms