Skip to content

Ashville Heliport (OA26) Frequencies

Ashville Heliport (OA26) is a private-use heliport 3 nautical miles west of Ashville, Ohio. It has no control tower; pilots announce on the CTAF, 122.90 MHz.

Quick answer: Ashville frequencies

  • CTAF 122.90 MHz

FAA data cycle effective October 29, 2026. Verify against a current chart before flying.

About Ashville

  • 1 radio frequency is listed for Ashville by the FAA.
  • No control tower: traffic is uncontrolled and pilots self-announce.
  • 1 runway, the longest 12 ft (H1).
  • Field elevation 706 ft above sea level.
  • Responsible air route traffic control center: ZID.

Ashville radio frequencies

Air traffic control and airport communications use the VHF aircraft band (118 to 137 MHz) in AM mode.

CTAF

CTAF
Frequency (MHz)Service
122.90 CTAF

Ashville runways

Runways at Ashville
RunwayLengthWidthSurfaceLightingInstrument approach and pattern
H1 12 ft 12 ft Turf

FAA remarks

  • For cd contact columbus approach at 614-338-8537.

Location and details

Identifier
OA26
Type
Heliport, private use
Location
Ashville, Pickaway County, Ohio
Coordinates
39.7181, -83.0194
Elevation
706 ft
Control tower
No
Controlling facilities
Indianapolis Center

Frequently asked questions

What is the CTAF frequency for Ashville?

The common traffic advisory frequency (CTAF) for Ashville is 122.90 MHz. Confirm on a current chart before flying; frequencies can change.

How many runways does Ashville have?

Ashville has 1 runway: H1 (12 by 12 ft).

What is the elevation of Ashville?

Ashville is 706 feet above sea level.

Can I listen to Ashville on a scanner?

Yes. Air traffic control and airport communications use the VHF aircraft band, 118 to 137 MHz, in AM mode. Most scanners and handheld airband radios can receive it; set the mode to AM and enter the frequency.

Airports near Ashville